8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor

You are here: Home » Products » Hydraulic Motor » Ungrouped » 8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor

Pictures are for display only, please contact us to choose the right product for you.

Quantity:
Availability:





Inquire Add to Basket

Model:
BM series
Brand:
Xeriwell or Others

Product Description

Item:	Hydraulic Motors	Type:	Low Speed High Torque Hydraulic Motors
Displacement:	8 Ml/r - 1000 Ml/r	Speed:	10 Rpm - 2000 Rpm
Out Put Power:	3.2 KW - 43 KW	Option:	More Than 1000 Options
Highlight:	3.2 KW Low Speed High Torque Hydraulic Motor , 8 Ml/R High Torque Hydraulic Motor , 10 Rpm Low Speed High Torque Hydraulic Motor

Guide for use, installation and maintenance of hydraulic motors

1. Matters needing attention

1.1 Output steering (with photos)

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 0

1.2 The correct use of the hydraulic motors will directly affect the working life. Therefore, the following basic

requirements must be met.

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 1

1.2.1 System requirements

The system should be equipped with a corresponding oil filter to ensure the cleanliness of the system oil.

The hydraulic circuit must be equipped with a cooling system to prevent excessive oil temperature.

Pressure gauges and thermometers must be installed in the oil inlet lines.

A pressure gauge should be installed in the hydraulic circuit of the hydraulic pump.

1.2.2 System hydraulic oil requirements

According to the different ambient temperature and usage, the oil used should have good viscosity

temperature performance, good defoaming properties, anti-oxidation, anti-rust, high flash point, etc. During the

operation of the motor, its viscosity is between (25-70)*10-6m2/s, and the water, alkali and mechanical

impurities in the oil must not exceed the allowable value.

It is recommended to use YB-N46, YB-N68 anti-wear hydraulic oil.

The filtration accuracy of the system is better than 20μm.

Normal working oil temperature is 25-55℃, short-term working oil temperature is not higher than 65℃.

2. Hydraulic Motors installation

Before installation, check whether the motor is damaged. The motor oil stored for a long time needs to be

drained and rinsed to prevent the internal moving parts from sticking.

The motor mounting bracket must have sufficient rigidity to prevent shock and vibration during rotation.

The mounting bolts must be tightened evenly.

Connection method of drain pipe:

The BMR motor has two built-in check valves, and the leaked oil can return to the oil return pipe through the

check valve, (with photos)

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 2

A) When the oil return pressure is ≤1Mpa, there is no need to connect the drain pipe;

B) When the oil return pressure is greater than 1Mpa, the drain pipe must be connected. (Drain pipe location

diagram)

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 3

The motor is unstable when running at low speed and can be eliminated by applying back

Pressure, the back pressure value is not less than 0.2 Mpa

This type of hydraulic motors can not be operated under the pump working conditions, nor can it be

used as a pump

The installation surface should be flat

The installation should determine the connection flange, the stop, and the output connection

shaIt size is accurate.

Ensure that the output shaft and the device onnected to the transmission have good

concentricity. When the output shaft is installed, it is necessary to prevent the axial thrust of

the output shaft and the interlocking devide. ( the hydraulics motors BMR bears a small radial

force.)

During the installation process, the smoothness and parallelism of the connecting plate part

of the oil inlet and outlet are protected to prevent the oil sealing effect caused by the pumps

from being bad, resulting in oil leakage

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 4

The screws and the rear cover of the rear of the hydraulic motors must not be hit during

installation. If you want to tap, please tap the mounting flange ( with photos )

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 5

The motor cannot be installed forceIully or twisted.

Do not remove the plastic plugs above the Spiplines and oil pipes before they are installed

When the system is connected, the relationshpS between the installation position of the hydraulic motors

inlet and outlet on the installation drawing and the rotation oI the hydraulic motors should be recognized

During the installation, it was found that the oil inlet and outlet are not suitable Ior the

corresponding positive and negative rotation directions oI the output shaft. Replacing the

installation of the oil inlet and outlet pipes for the A and B chambers can achieve the opposite

effect to the original working rotation direction.

3. Use of the hydraulic motors

3.1 Use of hydraulic motors

The pressure, flow and output power of the hydraulic motors must not exceed the specified values.

When running for a long time, the oil temperature dose not exceed 65 ℃

Motor limit working temperature: -30℃ - 70 ℃

3.2 Commissoning

Before starting, check the hydraulic motors installation, whether the connection is correct and firm and the system is correct

Check whether the oil inlet and outlet directions and hydraulic motors rotation direction meet the requirements of working conditions

The pressure of the relief valve of the oil supply line is adjusted to the lowest value, and gradually adjusted to the required pressure

after opration. Tighten the inlet and outlet pipes and the drain pipe.

After running the motor under no load for at least 10 minutes, gradually increase the pressure to the working pressure,

and observe whether the hydraulic motors is running mormally at any time during the operation

During operation, the working conditions of the hydraulic motors and system should be checked frequently.

If abnormal temperature rise, leakage, vibration and noise or abnormal plusation of pressure are found, the machine should

be stopped immediately to find our the cause.

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 6

During use, when the temperature of the oil inlet is >=65 ℃, please check whether the cooler works normally.

To ensure the mormal working temperature of the hydraulic motors surface.

Motor transportation should be equipped with appropriate wooden boxes and cardboard boxes according to the size of the hydraulic motors and plastic paper packaging on the surface of the hydraulic motors to prevent the moisture and moisture from invading the hydraulic motors and causing the hydraulic motors to rust and cause hydraulic motors failure.

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor 7

Avoid placing the hydraulic motors directly on the fround, No need to apply anti-rust oil for a long time

Hydraulic motors storage envionment: 10-9%RH, -20 - 65SC.

During transportation and storage, the hydraulic motors should avoid moisture.

XeriWell is a dedicated provider of hydraulic products, specializing in hydraulic motors, pumps, components, and complete hydraulic systems. Positioned as a trusted supplier to the global market, we focus on delivering innovative and reliable hydraulic solutions that meet the highest standards. With a commitment to serving clients worldwide, XeriWell provides tailored solutions that address the unique hydraulic needs of any region, supporting industries with high-quality, dependable performance.

At XeriWell, we bring extensive expertise to the hydraulic industry, grounded in a deep understanding of industry standards and certifications that ensure top-quality products and services. Our team of specialized hydraulic engineers is well-versed in international standards, rigorously following certifications and guidelines to meet diverse market requirements. With an average of over 10 years of experience, our professionals have the knowledge to handle complex projects and offer fully customizable solutions.

XeriWell offers a comprehensive range of hydraulic products, including hydraulic motors, pumps, components, complete hydraulic systems, and various other hydraulic parts to meet diverse industry needs. In addition to our extensive product line, we provide tailored hydraulic system solutions, designed to meet each client's unique specifications. Our customization services save clients valuable time by eliminating the need to source multiple suppliers, delivering fully integrated and efficient solutions for their hydraulic applications.

XeriWell's core competitive advantage lies in our technical expertise. Unlike standard suppliers, we are a technology-driven company focused not only on sourcing high-quality hydraulic products but also on offering strategic guidance and expert recommendations to our clients. This technical strength, combined with our comprehensive product range and customization capabilities, allows us to deliver hydraulic solutions that truly add value and meet the specific needs of a global clientele.

At XeriWell, our vision is to be a leading global provider of innovative and reliable hydraulic solutions that drive industry progress and customer success. We are committed to excellence, integrity, and customer-centric service, valuing strong partnerships and continuous improvement. Our goal is to empower our clients by delivering high-quality, tailored solutions that meet evolving industry demands, fostering a future where hydraulic technology is seamlessly integrated, efficient, and sustainable for all.

At XeriWell, we offer a comprehensive range of hydraulic components, including hydraulic motors, pumps, accessories, valves and more, with options for both original and high-quality domestic alternatives. Backed by a robust supply chain, we are able to meet the vast majority of our clients'procurement needs, from standard models to non-standard and even discontinued products. Additionally, we provide fully customized services and solutions tailored to specific requirements, ensuring clients receive precisely the products and configurations needed for optimal performance. Our commitment to flexibility and reliability makes XeriWell a trusted partner for all hydraulic sourcing and customization needs.

Ningbo Machine Hardware

Ningbo Engineering & Construction Machinery

Ningbo Cutting Machine

Ningbo Pipe Fittings

Ningbo Apparel

Ningbo Auto Parts & Accessories

Ningbo Stationery

Zhedong Valve

Hydraulic

8 Ml/R 10 Rpm 3.2 KW Low Speed High Torque Hydraulic Motor

3.2 KW Low Speed High Torque Hydraulic Motor

8 Ml/R High Torque Hydraulic Motor

10 Rpm Low Speed High Torque Hydraulic Motor

3.2 KW Low Speed High Torque Hydraulic Motor

8 Ml/R High Torque Hydraulic Motor

10 Rpm Low Speed High Torque Hydraulic Motor

About XeriWell

Quick Links

Products

Get In Touch