Type: | |
---|---|
Spare Parts: | |
Availability: | |
Quantity: | |
HMR
Xeriwell or Others
The Linde double motor HMR series consists of two Series 02 variable motors aranged back-to-back. in addition to a wide torque/speed conversionranae it offers the option of direct installation in the drive ine, since one or two shalt ends are optionally available for toraue outputNoise emission and fuel consumption are reduced because no transfer gearbox is required. At the same time the overall eficiencyincreases.
Design characteristics:
1) high pressure axial piston motor in swash plate design for closed and open loop systems
2) optimised start-up and low-speed characteristics
3) optionally with purge valves for circuit and case flushing
4) HP walves possible
5) through-shaft with bare shaft end or coupling flange
6) SAE High pressure ports, radial or axial
7) SAE mounting flange with ANSl or SAE spline shaft
8) plug-in version optional
9) speed sensor optional
Product advantages:
1) smooth low-speed operation
2) high starting torque
3) lower emissions through speed reduction
4) compact design
5) high power density
6) high reliability
7) long service life
8) highly dynamic response characteristics
9) simplified drive line
Type: HMR28-02, HMR35-02, HMR55-02, HMR63-02, HMR75-02, HMR85-02, HMR105-02, HMR135-02, HMR165-02, HMR210-02, HMR280-02
Linde HMR 28/35/50/55/63/75/85/105/135/165/210/280/-02 Hydraulic Motor spare parts list:
The Linde double motor HMR series consists of two Series 02 variable motors aranged back-to-back. in addition to a wide torque/speed conversionranae it offers the option of direct installation in the drive ine, since one or two shalt ends are optionally available for toraue outputNoise emission and fuel consumption are reduced because no transfer gearbox is required. At the same time the overall eficiencyincreases.
Design characteristics:
1) high pressure axial piston motor in swash plate design for closed and open loop systems
2) optimised start-up and low-speed characteristics
3) optionally with purge valves for circuit and case flushing
4) HP walves possible
5) through-shaft with bare shaft end or coupling flange
6) SAE High pressure ports, radial or axial
7) SAE mounting flange with ANSl or SAE spline shaft
8) plug-in version optional
9) speed sensor optional
Product advantages:
1) smooth low-speed operation
2) high starting torque
3) lower emissions through speed reduction
4) compact design
5) high power density
6) high reliability
7) long service life
8) highly dynamic response characteristics
9) simplified drive line
Type: HMR28-02, HMR35-02, HMR55-02, HMR63-02, HMR75-02, HMR85-02, HMR105-02, HMR135-02, HMR165-02, HMR210-02, HMR280-02
Linde HMR 28/35/50/55/63/75/85/105/135/165/210/280/-02 Hydraulic Motor spare parts list: